Illuminated refinery and process plant at night

QHSE • INSPECTION • SUPERVISION

Industrial QA/QC, Inspection & Technical Supervision

From Fabrication Surveillance to Complete Project Handover

We provide industrial QA/QC support, inspection coordination and access to qualified technical specialists for project-specific requirements. From fabrication surveillance to quality documentation and project close-out, we help clients maintain traceability, compliance and continuity through handover.

Core Disciplines
  • QA/QC Engineering
  • Inspection & NDT
  • HSE Supervision
  • QM & Audits
  • Documentation & Close-Out
  • Digital Solutions
Industry Sectors
  • Heavy Steel Fabrication
  • Pipelines & Infrastructure
  • Oil & Gas
  • Refineries & Petrochemical

Expertise

From individual specialist support to coordinated project teams, we provide practical industrial expertise according to the scope, technical requirements and stage of each assignment.

Quality planning, inspection coordination and implementation follow-up. Support with ITPs, QCPs, applicable PTPs, quality procedures, reporting, non-conformities and client quality requirements.

Key capabilities

  • Quality plans and procedures
  • Inspection and Test Plans (ITP)
  • Quality Control Plans (QCP)
  • Project-specific PTPs, where applicable
  • Inspection readiness and hold/witness points
  • NCR and corrective-action follow-up
  • Quality reporting and coordination
Construction engineers reviewing plans and quality records on site

Targeted inspection and surveillance for workshop fabrication and site execution. We support projects with physical verification against approved specifications, coordinate witness and hold points, track non-conformities, and compile clear inspection records to maintain handover readiness.

Inspection activities & capabilities

  • Site and fabrication inspection activities
  • Inspection coordination and surveillance
  • Verification against applicable project specifications and inspection requirements
  • Inspection records, reporting and documentation
  • Identification and follow-up of non-conformities (NCRs)
  • Coordination with project stakeholders and inspection readiness through handover
Engineer in a hard hat inspecting an installed component on site

As a core quality verification service, we coordinate and provide suitably qualified NDT specialists for project-specific inspection requirements, covering conventional non-destructive examination and advanced ultrasonic methods across fabrication and site works.

Important: The method, inspection procedure, acceptance criteria and required personnel qualifications must be confirmed for each project. Do not suggest that every method is available for every material, component or assignment.

Methods and capabilities available through qualified specialists

  • VT — Visual Testing
  • PT — Penetrant Testing
  • MT — Magnetic Particle Testing
  • UT — Ultrasonic Testing
  • RT — Radiographic Testing
  • PAUT — Phased Array Ultrasonic Testing
  • TOFD — Time-of-Flight Diffraction
  • PMI — Positive Material Identification, where available
  • Hardness testing and other specialist methods, subject to project requirements and available qualifications
Gloved hand holding an ultrasonic flaw detector during NDT inspection

Support with welding quality, material traceability, fabrication records and coordination of suitably qualified welding specialists.

Key capabilities

  • Welding quality coordination
  • WPS and WPQR/PQR documentation review
  • Welder qualification records
  • Weld maps and weld traceability
  • Material certificates and heat-number traceability
  • EN 10204 material documentation
  • Repair documentation and follow-up
  • Coordination of coating inspection where required
Welder at work with bright welding arc and sparks

Structured quality records, traceability and final documentation packages to support inspection, compliance and handover requirements.

Key capabilities

  • MDR / Manufacturing Data Record or Manufacturing Data Book, as defined by the client
  • Final quality dossiers and handover packages
  • Inspection and test records
  • MTR/MTC review and material traceability
  • NCR registers and close-out evidence
  • RFI and inspection request follow-up
  • Punch lists and outstanding documentation
  • Document registers, revision control and completeness checks
  • Documentation backlog recovery
Quality records and a document binder on a project desk

A dedicated core service providing qualified HSE professionals for industrial site supervision, safety coordination, implementation follow-up and project-specific safety requirements.

Key capabilities

  • HSE site supervision, subject to assignment requirements
  • Safety coordination and follow-up
  • Site safety documentation
  • HSE reporting and action tracking
  • Interface with project teams and site management
  • Support with project-specific safety requirements
Hands completing a heavy equipment inspection and safety checklist
Construction engineers reviewing plans and quality records on site

Industries We Support

Industrial quality and inspection support tailored to the requirements of fabrication, infrastructure, energy and process projects.

  • Aerial view of an industrial construction site

    Industrial Construction & Installation

    Plant construction, steel structures, mechanical installation and site works for industrial and energy facilities.

  • Welded pipeline on supports along a construction route

    Pipelines & Infrastructure

    Pipeline construction, transmission infrastructure, piping systems and associated inspection and quality activities.

  • Process piping and storage tanks at an oil and gas facility

    Oil & Gas

    Industrial facilities, pipeline systems, fabrication, maintenance and project-specific quality requirements.

  • Pipe racks and process columns at a petrochemical plant

    Refineries & Petrochemical

    Process plants, piping, equipment, fabrication, brownfield projects, shutdowns and revamps.

  • Power station with cooling towers and electrical equipment

    Energy & Power

    Industrial energy infrastructure, power-related installations and project quality support.

  • Welder working on a steel part in a fabrication workshop

    Industrial Manufacturing & Fabrication

    Steel structures, heavy fabrication, welding, inspection and manufacturing quality.

  • Engineers reviewing blueprints at a refinery construction site

    EPC & Engineering Projects

    Project-based technical support, inspection coordination, quality documentation and handover activities.

  • Technicians maintaining a pipeline from site scaffolding

    Maintenance, Shutdowns & Revamps

    Inspection, quality follow-up, documentation recovery and close-out support during planned or time-critical work.

Why Pipeline Quality

The Right Expertise. The Right Capacity. For Your Project.

  • Practical Industrial Experience

    An understanding of fabrication, inspection requirements, technical documentation and site realities.

  • Flexible Project Support

    Individual specialists or coordinated teams, depending on project scope and demand.

  • Quality Through to Handover

    Support across inspections, non-conformities, traceability, documentation and project close-out.

  • Competencies Matched to the Assignment

    Professional qualifications and experience are assessed against the technical and project requirements.

  • Coordinated Communication

    Responsibilities, reporting and interfaces are agreed with the client and project team.

Technical Capabilities & Qualifications

Depending on project requirements, our professional network can provide suitably qualified specialists across quality management, welding, NDT, materials, inspection, coating and HSE. Individual qualifications and relevant experience are checked against the requirements of each assignment.

  • ISO 9001 — Quality Management Systems
  • ISO 19011 — Guidelines for Auditing Management Systems
  • ISO 14001 — Environmental Management Systems, where applicable
  • ISO 45001 — Occupational Health and Safety Management Systems
  • ISO 3834 — Quality Requirements for Fusion Welding of Metallic Materials, where applicable
  • Internal quality audits and supplier audits, according to individual competence and assignment scope

  • ISO 9606 — Qualification Testing of Welders
  • ISO 15614 — Welding Procedure Qualification
  • ISO 14731 — Welding Coordination
  • EN ISO 14732 — Qualification of Welding Operators and Weld Setters, where applicable
  • ASME Section IX — Welding, Brazing and Fusing Qualifications
  • WPS — Welding Procedure Specification
  • WPQR/PQR — Welding Procedure Qualification Record
  • Welder qualification records
  • Weld maps and weld traceability

Methods

  • VT — Visual Testing
  • PT — Penetrant Testing
  • MT — Magnetic Particle Testing
  • UT — Ultrasonic Testing
  • RT — Radiographic Testing
  • PAUT — Phased Array Ultrasonic Testing
  • TOFD — Time-of-Flight Diffraction
  • PMI — Positive Material Identification, where available
  • Hardness testing and other methods, where available and required

Relevant standards and qualification frameworks, as applicable

  • ISO 9712 — Qualification and Certification of NDT Personnel
  • ISO 17635 — General Rules for Non-Destructive Testing of Welds
  • ISO 17640 — Ultrasonic Testing of Welds
  • ISO 13588 — Automated Phased Array Ultrasonic Testing
  • ISO 10863 — TOFD
  • ISO 19285 — PAUT Acceptance Levels, where applicable
  • Relevant method-specific standards and project procedures

The exact method, personnel qualification level, applicable sector and acceptance criteria must be confirmed against the project specification.

  • Visual and dimensional inspection
  • Fabrication surveillance
  • Drawing and specification verification
  • Inspection and test records
  • Inspection and Test Plans (ITP)
  • Quality Control Plans (QCP)
  • Project-specific PTPs, where applicable
  • Hold points, witness points and inspection releases
  • Client and third-party inspection coordination

  • EN 10204 — Inspection Documents for Metallic Products
  • MTR/MTC review and traceability
  • Heat-number and material identification checks
  • Material traceability registers
  • Verification of material documentation against project requirements

  • Applicable DNV requirements, including DNV-ST-0126 where relevant to the project
  • EN 1090, where applicable
  • Structural steel fabrication documentation
  • Weld traceability and inspection records
  • Project-specific fabrication and inspection requirements

Applicable editions, project specifications and contractual requirements must always be confirmed.

  • PED 2014/68/EU, where applicable
  • Relevant EN and ASME codes, according to the project
  • Piping fabrication and inspection documentation
  • Material traceability
  • Pressure-test records and supporting documentation, where within the agreed scope
  • Brownfield, shutdown and revamp documentation support

  • ISO 12944 — Corrosion Protection of Steel Structures by Protective Paint Systems
  • ISO 8501 — Visual Assessment of Surface Cleanliness
  • ISO 8502 — Tests for the Assessment of Surface Cleanliness
  • DFT — Dry Film Thickness inspection, where within the assigned scope
  • FROSIO-qualified personnel, where available
  • AMPP/NACE qualifications, where available and applicable

Depending on assignment requirements, the professional network may provide personnel with relevant qualifications such as:

  • SCC/VCA
  • IOSH
  • NEBOSH
  • Other recognised or client-required HSE training and certifications
Worker in a safety vest on a steel beam in a fabrication facility

Experience

Experience Behind Pipeline Quality

Pipeline Quality combines hands-on industrial project experience with the capabilities of a professional network covering quality, inspection and technical supervision.

Project Experience

Heavy Steel Fabrication QA/QC — Europe

QA/QC support during heavy steel fabrication, including inspection coordination, welding quality documentation, inspection records, non-conformity follow-up, reporting and coordination with project stakeholders.

Broader Industry Experience

Our professional network brings additional experience in heavy fabrication, chemical and petrochemical facilities, process plants, pipelines and industrial energy projects. Specialists are selected according to the scope, relevant project experience and qualification requirements of each assignment.

How We Work

  1. 01

    Define the Scope

    We clarify project requirements, deliverables, schedule and required competencies.

  2. 02

    Match the Expertise

    We identify suitable professionals according to the assignment scope and qualification requirements.

  3. 03

    Coordinate the Support

    Responsibilities, interfaces and reporting are aligned with the client and project team.

  4. 04

    Follow Through to Close-Out

    We support agreed inspection, quality, HSE or documentation activities through the required project milestones.

DIGITAL SOLUTIONS

Digital Solutions for Industrial Operations

Turning Industrial Challenges into Digital Solutions

Our engineers understand industrial processes and identify where digital solutions can improve the way work is done. Working with digital specialists, we translate real operational needs into practical, tailored solutions.

From weld and NDT traceability to inspection records and quality documentation, we help industrial clients reduce manual work and connect project information more effectively.

Discuss Your Digital Project
Quality engineer holding an industrial tablet displaying weld and NDT traceability beside fabricated steel

Discuss Your Project

Tell us what your project requires. Share the location, expected timeframe and type of support needed, and we will review the request and discuss a suitable approach.

Fields marked with * are required

Service Required